Use this guide to exchange the back and front panels of your re:Mix. To proceed to the exchange you will need the following tools:. Screwdriver with Torx 10 (T10) tip (if electric, use only in case it has an adjustable Torque). Screwdriver with 3mm f

Use this guide to exchange the back and front panels of your re:Mix.&#xA0;To proceed to the exchange you will need the following tools:<ol><li>Screwdriver with Torx 10 (T10) tip (if electric, use only in case it has an adjustable Torque)</li><li>Screwdriver with 3mm flat-tip&#xA0;</li></ol>&#x26A0;&#xFE0F; Before starting any operation, ensure your re:Mix is unplugged from the electric socket, otherwise you may get a life-threatening electric shock.&#xA0;IMPORTANT NOTES<ul><li>Do not use an electric screwdriver if it does not have a minimum Torque of 0,2 Nm otherwise you could end up damaging the plastic thread of the screw socket.</li><li>If you use a manual screwdriver, and therefore you cannot use the Torque units to limit the amount of force to screw, only screw until you feel resistance otherwise it might damage the plastic thread of the screw socket.</li><li>Be aware that when mounting the back and front panels, the screw head may not be perfectly aligned with the panel surface, meaning that the screw might be slightly sticking in or out.</li></ul> <h2 id="step-1---remove-the-back-panel">STEP 1 - Remove the back panel</h2>Take your re:Mix and place it upside-down on your working desk.Use your manual screwdriver with a Torx-10 tip, or your electric one set on Torque 0 (0,2 Nm) and start unscrewing the 4 screws of the back panel.&#xA0;<img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-8351cff5-1768-45e1-ad67-f68441c2d2c4-89c75ddd-bfdc-4460-b23b-6490db30ad89.png" style="width: 300px;" class="fr-fic fr-dib">Now, your back panel is ready to be removed!<img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-719388ca-94a7-4b4e-8de1-5574199d5030-fdb56d6a-5eb9-4ca8-b1af-e0929a69546d.png" style="width: 300px;" class="fr-fic fr-dib"><h2 id> </h2><h2 id="isPasted">STEP 2 - Remove the front panel</h2>Turn your re:Mix and start unscrewing the next 4 screws of the front panel.&#xA0;<img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-d8d612c8-0a5f-42cb-b37b-763c58cbb78f-f6445f80-fb60-4a21-b5d6-bdaf591a4973.png" style="width: 300px;" class="fr-fic fr-dib"><h2 id="isPasted">STEP 3 - Remove the switch component</h2>Unscrew the switch from the front panel.Use your manual screwdriver or your electric one with a Torx-10 tip, set on Torque 1 (1/1,2 Nm) and unscrew the 2 screws, which hold the switch attached to the front panel.&#xA0;<img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-acf3acd9-37e1-4368-ad70-7a9e0d6a6737-36ffccf5-27a9-4332-a6d5-32b0975960e0.png" style="width: 300px;" class="fr-fic fr-dib"><img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-bf1f8d0a-e192-43d3-9057-4cf9c1c2de29-09dcdf5b-1a52-42b1-a27c-a5eac3cbb086.png" style="width: 300px;" class="fr-fic fr-dib"><h2 id="isPasted">STEP 4 - Remove the aluminium knob</h2>Now, it is time to remove the aluminium knob. To do so, you have to insert the flat-tip screwdriver into the small hole placed on the side of the knob. Unscrew the knob by turning the screwdriver just a few times.&#xA0;Do not unscrew completely or you might disassemble the components of the knob.<img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-06c2a548-86fa-43fe-bd4a-0f7bb72564ae-c9224f7b-8d3c-4306-8aa4-f01205fa23e5.png" style="width: 300px;" class="fr-fic fr-dib"><img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-a5aeb1bd-75fc-4c1e-acfe-6704fb0b9978-7d77e767-50b1-4d2c-a96d-a2f6f3096cf0.png" style="width: 300px;" class="fr-fic fr-dib">Detach the knob from the panel by grabbing the knob with your fingers and pulling it out.&#xA0; <h2 id="isPasted">STEP 5 - Mount the switch&#xA0;</h2>Take your 2 new panels and prepare to do the inverse procedure to mount them on your re:Mix.Start with the front panel.&#xA0;<img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-d5ae90c4-a6f0-4c53-a713-85f89de6d4d9-9fdc4261-b7c9-48b9-8527-319a2e6e9f89.png" style="width: 300px;" class="fr-fic fr-dib">The first thing to do here is to attach the switch component to the panel.&#xA0;<img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-2f9aaad3-6c31-49fa-b042-6dd1e5e39709-a20f3c80-91bf-48f4-95fc-439e47eae368.png" style="width: 300px;" class="fr-fic fr-dib"><img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-15a5aeab-b54f-4781-a3e3-2b715fe93b0b-f7668150-ffaa-4f8a-be85-f7b199b0c155.png" style="width: 300px;" class="fr-fic fr-dib">Be very careful to set-up the switch in the correct position: &#xA0;The pin switch that sticks out of the panel has a round and a flat side. The flat side must be facing the opposite side of the sticker as you can see in the picture below.<img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-96417f1c-2870-41e2-8eb0-876ae1c5aa05-fea223c4-de5a-4925-85c2-31b34da3175a.png" style="width: 300px;" class="fr-fic fr-dib">When the switch is set up correctly fix it back onto the panel with its 2 original screws.Use your manual screwdriver or your electric one with a Torx-10 tip set on Torque 1 (1/1,2 Nm).<img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-8c2aebef-09ee-4521-bba3-b58e9501caca-28e73201-a260-4832-b08b-38967b2b51ed.png" style="width: 300px;" class="fr-fic fr-dib"><h2 id="isPasted">STEP 6 - Mount the knob</h2>Take the knob and by pressing with your finger, attach it to the pin of the switch.The knob is set correctly if the speed indicator is pointing towards the sticker on position 0.<img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-aa3374cc-5721-4b0f-8211-530dfc82666e-a7a4fa7a-5c59-4212-a8a7-64000a8407b1.png" style="width: 300px;" class="fr-fic fr-dib"><img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-06123a9b-2d0a-4518-ba1e-3425156a59dd-223ac0ce-f4ea-4990-84dc-96b1037d2af4.png" style="width: 300px;" class="fr-fic fr-dib">Once the knob is properly set up, take the flat-tip screwdriver, insert it into the small hole placed on the other side of the knob and screw it until you feel it is tight.<img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-bb1aab41-0433-47eb-a074-7c3d79c607ed-c413495c-7257-4059-8a1f-c13050c2c481.png" style="width: 300px;" class="fr-fic fr-dib"><h2 id="isPasted">STEP 7 - Mount the front panel onto the re:Mix</h2>Use your manual screwdriver or your electric one with a Torx-10 tip, set on Torque 0 (0,2 Nm) and screw back the 4 screws of your front panel.&#xA0; <img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-4f7113e1-429c-411d-93d0-c1fa9981c25f-f51e7057-5d0b-4de0-b228-f949c972a3fd.png" style="width: 300px;" class="fr-fic fr-dib">&#xA0;<h2 id="isPasted">STEP 8 - Mount the back panel onto the re:Mix</h2>Use your manual screwdriver with a Torx-10 tip, or your electric one set on Torque 0 (0,2 Nm) and screw back the 4 screws of your front panel.<img data-fr-image-pasted="true" src="https://downloads.intercomcdn.com/i/o/1150677347/352f79e7502c8e940703537c/WhatsApp+Image+2024-08-19+at+14_27_40.jpeg?expires=1739394000&amp;signature=9b98dde62bf8fe145c392a9c73d310c42c9861b7f54f5bba466b05e24d9b4803&amp;req=dSEiFs95moJbXvMW3Hu4gVH%2BxS1QQyrzozvGyprvFfbeZ09QNMNv48igg%2FS%2F%0AfQ%3D%3D%0A" style="width: 300px;" class="fr-fic fr-dib">

How to exchange back and front panels

Use this guide to exchange the pins of your blades head. To proceed to the exchange you will need the following tool:. Manual screwdriver with a cross-tip size C 2,2 x 9,5 H (Phillips). IMPORTANT NOTES. Do not use an electric screwdriver, otherwise y

Use this guide to exchange the pins of your blades head.To proceed to the exchange you will need the following tool:Manual screwdriver with a cross-tip size C 2,2 x 9,5 H (Phillips)&#xA0;IMPORTANT NOTES<ul><li>Do not use an electric screwdriver, otherwise you could end up damaging the plastic thread of the screw socket.</li><li>Only screw until you feel resistance otherwise it might damage the plastic thread of the screw socket.</li></ul>&#xA0;<hr>&#xA0;<h2 id="step-1---disassemble-the-blades-head">STEP 1 - Disassemble the blades head</h2>To disassemble the blades head follow the plan below.&#xA0;You can also watch our video tutorial <a href="https://drive.google.com/file/d/161HssBkr25ZLvx1PQ6Ttrihyd_tMwWyi/view?usp=sharing" rel="nofollow noopener noreferrer" target="_blank">here</a>.<img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-062dc028-1d18-42f7-abef-6ae785fe2545-345a85c7-5eee-4b80-8ceb-521468774ba6.png" style="width: 496px;" class="fr-fic fr-dib"><h2 id="isPasted">STEP 2 - Remove the pin&apos;s stoppers and the pins</h2>Use the screwdriver to unscrew the two pairs of screws that hold the pin&apos;s stoppers in place.<img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-2878bbd3-03cc-4c1b-840c-00a35ca6bcc1-f7fe92c8-5a8e-436f-9537-46d9936f7c89.png" style="width: 300px;" class="fr-fic fr-dib">Now you can remove the pin&apos;s stoppers.<img src="https://attachments.gorgias.help/MNVgn6mnkKN21j8B/hc/MdAV17qgZr6ZWgaX/2025021121-393253dd-56b0-4396-aaf3-30cf14daf6ac-8f939bbe-7ba0-41da-b155-e7c6d014984f.png" style="width: 300px;" class="fr-fic fr-dib">And now remove the pin.<img data-fr-image-pasted="true" src="https://downloads.intercomcdn.com/i/o/1191162231/bb666b5d23bb6b231ea84cbc/Screenshot+2024-09-24+at+15_36_06.png?expires=1739394000&amp;signature=402c5e5e8e360448b228be6d9836fb6492615cf15520a4da17846d02a4de75f0&amp;req=dSEuF8h4n4NcWPMW3Hu4gcpt8JpoFsDCsdkNy%2FK%2Bfx%2Blj4BYt04OsgR68l9X%0AvQ%3D%3D%0A" style="width: 300px;" class="fr-fic fr-dib"> <h2 id="isPasted">STEP 3 - Exchange the pins and assemble the blades head</h2>Take the new pair of pins and insert them into their holes, making sure that the springs are correctly positioned straight and fixed onto their own spring holder.&#xA0;<img data-fr-image-pasted="true" src="https://downloads.intercomcdn.com/i/o/1191188836/901d0a1817dc3f6ccec72581/Screenshot+2024-09-24+at+15_54_55.png?expires=1739394000&amp;signature=25ed1d9888c5551d79a07634632f9ad785ed0ace5c06cc53433f932b16064f9b&amp;req=dSEuF8h2lYlcX%2FMW3Hu4gZYZdhkaLHlMUVUNrfRiMRnEygwD0GJTUbeY2ZPh%0AqQ%3D%3D%0A" style="width: 300px;" class="fr-fic fr-dib"> Screw back the pin stoppers and assemble the blades following the instructions of STEP 1 &#xA0;by reading the steps in the reversed order.

How to exchange the pins of blades head's pins

🇬🇧

🇫🇷

🇩🇪

Open Funk

Repair guides

Issues & repairs

Are the glass jars safe to use?

Are the parts in contact with food BPA-free?

What materials are in contact with food?

Health & safety

Control

Where can I find the serial number?

Interface

What power does the motor have?

Does re:Mix come with a Swiss plug?

Specs

Cleaning the body

Cleaning the blades head

Cleaning

Where can I find the open-source files of re:Mix?

Does does re:Mix' power compare to Nutributtlet or Vitamix?

Are there any independent reviews of re:Mix?

Do you offer spare parts?

What is included in the main re:Mix package?

Can I recieve your newsletter in another language?

Other

The re:Mix user guide

Assembly guide, Bill of Materials & Technical Documentation

Open-Source documentation

Downloads & links

re:Mix

What can I blend with re:Mix?

Can I blend soups 🍲 with re:Mix?

Can re:Mix blend nuts 🥜 frozen fruits 🍓 or ice cubes 🧊 ?

Can I grind coffee ☕️ with re:Mix?

Where can I find food recipes?

Tips for making nut butters

Useful tips for blending

How to pick the right jar

Can I make ice cream using frozen fruits in my mixer?

How to make hummus

How to make smoothies

How and what to blend

Which jars work with re:Mix?

Are you planning to make re:Mix compatible to other kinds of jars?

Does re:Mix work with Weck jars?

Jar library: 🇩🇪 Germany

Jar library: 🇫🇷 France

How can different jars fit on the same device?

Do the jars come with a lid?

Can I also use conventional retail jars?

Are glass jars included in the package?

Jars

Do you offer local repairs in Berlin?

re:Mix not starting or having issues running

Blades head is leaking

Blades head doesn't fit on jars anymore

Liquids spilled unto the device

Products damaged during transportation

Other issues

Issues

Can I change my shipping address?

What countries do you ship to?

Are you planning to ship to the US or outside the EU/CH anytime soon?

What is the shipping policy of Open Funk?

Are customs duties included in the final price?

Is VAT included in the final price?

How can I get an invoice for my order?

Do you offer local pickup?

How can I determine if my order is ready for pickup?

What should I do if my order does not go through?

Orders & shipping

What is Open Funk's refund policy?

How can I return my re:Mix?

How to pack your order for return

What is your return policy for faulty blenders?

Returns and refunds

What is Open Funk's warranty policy?

What costs are covered in the final price?

What forms of payment does Open Funk accept?

Orders, shipping & returns