Open Funk logo
Open Funk logo

Alle Artikel

Fehlerbehebung & Reparatur

re:Mix startet nicht oder hat Probleme beim Betrieb

Here are some common actions you can try if your re:Mix does not start. Yes, this important :). Make sure the blades head is tightly screwed unto the jar. For your security, the mixer will not start if this condition is not met. Make sure the surface

Aufsatz ist undicht

There should be 0 leaking from the blades head. As indicated in the user manual, the material of the head can get damaged, and the head locker can come loose if you:. Blend foods above 40 degrees Celcius. Dishwash the head. Wash or soak the head in h

Der Aufsatz passt nicht mehr auf die Gläser

Yes, continue to point 4. No, continue below. Yes, continue to point 3. No, continue below. Some jars might have small imperfections and might not be detected on your re:Mix. Try rotating the jar at least 45 degrees, and try it unto the head again. S

Flüssigkeiten auf dem Gerät verschüttet

Ihr re:Mix verfügt über ein internes Rohrsystem, durch das verschüttete Flüssigkeiten vom Mixbereich an der Oberseite des Geräts um den Motor herum zum Boden des Mixers abfließen können. Flüssigkeiten in kleinen und mittleren Mengen fließen durch die

Produkte beim Transport beschädigt

Trotz unserer Bemühungen kann es vorkommen, dass einige Artikel in beschädigtem Zustand bei Dir ankommen. In diesem Fall liefern wir Dir kostenlos einen Ersatz. Bitte kontaktiere uns und nenne die genauen Artikel, die beschädigt sind.