Open Funk logo
Open Funk logo

All articles

Using re:Mix safelyUpdated a day ago

re:Mix only starts when the jar and the blades head sit correctly in the base. That's a built-in safety lock. The rules below keep you, your jars and your re:Mix safe.

The four limits

  • Fill the jar between 20% and 70%. Never more.
  • Blend for 2 minutes at a time, max. Then let re:Mix cool for 15 minutes before the next run.
  • Only blend food at 40 °C or cooler.
  • Don't press or hold the jar while blending.

Before you blend

  • Check the jar. Hold it up to the light. Don't use a jar with cracks, chips, scratches, crazing or cloudiness: it could break during use. See Are the glass jars safe?
  • Only use compatible jars. See Which jars work with re:Mix?
  • Set the knob to OFF before you put the jar on the base.
  • Hold the blades head by its handles, not by the jar, when you place it on the base or take it off. It clicks into place.
  • Check for leaks before you place the jar on the base.
  • No fizzy or rising ingredients. Carbonated drinks, baking soda, baking powder and yeast build up pressure in the closed jar.
  • No very thick mixtures such as bread dough or mashed potatoes.
  • Never run re:Mix empty. The motor can overheat.

While re:Mix is running

  • Stay with it, and listen. If it suddenly sounds louder and higher, the blades are spinning in the air. Stop and check the jar.
  • Wait until the blades have stopped completely before you take the jar off the base.
  • Open the jar pointing away from your face and body.
  • Don't leave blended food standing in the closed jar on the base.

If something seems wrong

  • The jar gets warm while blending: stop at once. Slowly unscrew the blades head, with the jar pointing away from you, to release the pressure.
  • Smoke or a burning smell: switch off, unplug re:Mix and let it cool for 15 minutes. If it happens again, write to us.
  • The motor stops while blending: the thermal breaker has switched it off to protect the motor. Wait 15 minutes, then unplug re:Mix and plug it back in.
  • Food spilled into the base: unplug re:Mix and see Food spilled into the mixer body.
  • re:Mix, the cable or the plug is damaged: don't use it. Write to us with your order number and a photo.

Electricity

  • re:Mix runs on 220–240 V, 50 Hz. Check that this matches your mains supply.
  • Plug it directly into a wall socket. Don't use plug adapters, voltage converters, timers or sockets that switch on and off.
  • Keep the cable and plug dry. Never pull the plug by the cable or with wet hands.
  • Keep the cable away from heat, oil and sharp edges, and don't let it hang over the edge of the counter.
  • Never put the mixer body, cable or plug in water or any other liquid.
  • Unplug re:Mix when you're not using it, and before you assemble, open or clean anything.
  • Don't place re:Mix on hot surfaces or near open flames. Store it somewhere dry.

Blades and cleaning

  • The blades are sharp. Take care when you empty the jar, clean the blades head or take it apart.
  • Don't leave the blades head on the base without a jar. The blades are exposed.
  • Blades head: hand wash only, in water at 40 °C or cooler. Not in the dishwasher, and don't soak it. See How to clean the blades head.
  • Jars: wash by hand or on a low-temperature dishwasher cycle (40–50 °C). Avoid sudden temperature changes and knocks from other jars, dishes or metal spoons.
  • Mixer body: wipe it with a damp cloth.

Who can use re:Mix

  • re:Mix is made for use at home.
  • Children must not use re:Mix or play with it. Keep re:Mix and its cable out of their reach.
  • People with reduced physical, sensory or mental abilities, or without experience, should use re:Mix only with supervision or after being shown how to use it safely.

All details are also in the re:Mix user guide (PDF).

Was this article helpful?